Fiber Optic Part Number Build

For information about specific cable requirements, complete the form below and click "Build Part Number". The part number and description of the cable will be created and displayed online. You can then email the product to Remee and a sales representative will contact you.

Fiber Optic Series:
No. of Fibers: (1 to 288)
Fiber Type:
Attenuation: ** (dB/km) More Info
Bandwidth: (MHz/km) More Info
Jacket Type:
Jacket Color:
Central Strength Member:
No. of Fibers
per Sub Unit:
Special Instruction:
Listings:
(Remfo® Series 22, 23, 25 and 88 are RUS listed)
REDSs Cable Only
Complete this section only if you have selected Series 80 above.
Minimum SAG:
Loading Condition: More Info
Maximum Cable Span:

** Represent nominal values.  All fibers are tested for loss and continuity on the shipping reel.  Variations in length of cable on reel, reel size and spooling conditions may result in attenuation exceeding nominal values.  Attenuation measured on the shipping reel will not vary more than 0.50 dB/km from the nominal value.

 

Remee reserves the right to mark all it's cable constructions EITHER U/L or  ETL.
Remee Products Corp. P.O. Box 488, 468 Rte. 17A Florida, NY 10921
Toll Free: 800-431-3864 • Tel: 845-651-4431 • Fax: 845-651-4160